Leaning Tower of Pisa

by Community in build

Doodle a toppling tower of your own

Instructions

1. Draw out all the pieces in Make 6

2. Connect each bottom of the windows (non-stripy edges) to the inner

edges of the big octagon

3. Connect the smaller octagon to the tops of the windows

4. Draw out all the pieces in Make 1

5. Connect each bottom of the windows (non-arched edges) to the outer

edges of the octagon

6. Connect the tops of the windows of section 1 to the outer edges of the larger octagon of Make 6

7. Draw out all the pieces in Make 2

8. Connect each bottom of the windows (non-arched edges) to the outer edges of the octagon

9. Connect the tops of the windows (arched edges) to the outer edges of the octagon to the bottom of Make 1

10. Repeat Steps 7 through 9 with Make 3,4 & 5

11. Choose whether you want the tower to lean on tow blobs or a rectangle.

If you want two blobs: draws blobs about 5-6mm long off two adjacent points on the bottom of the octagon of Make 5